Home Company Product Spec Review Contact FAQ Order
 
Addtronics Home
Company
Product
W8500 (WTX form factor)
--------X3200
Extra Series Cases 
--------7890A (Server Tower)
--------7896A (Server Tower)
--------6890A (Full Tower)
--------6896A (Full Tower)
--------3890A (Mid Tower)
--------M90 (Micro ATX)
--------2901 (Flex ATX)
--------CL6210 (Full Tower)
--------CL7220 (Server Tower)
--------CL9240 (Server/12U)
--------R110 (1U Case)
--------R220 (2U Controller)
--------Controller Series
--------Server ATX Tower
--------Mid ATX Towers
--------Extra 90 Series
--------Extra 96 Series
--------Parts
--------OnlineOrderTable
Shop At Addtronics
--------Order Now
--------How To Order
--------Forms
--------Contact
--------Spec
--------

 

  It is not just a case. It is a User Friendly case.

FAN8BS Picture Sunon 80mm with Power supply connector.

FAN8BS3P Picture Sunon 80mm with 3 pin motherboard connector.

FAN9BS Picture Sunon 92mm with Power supply connector.

FAN9BS3P Picture Sunon 92mm with 3 pin motherboard connector.

FAN12BS Picture Sunon 120mm with Power supply connector.

Performance Curve

 
 

Specification

Direction of Rotation Counter-Clockwise Viewed from Fan Blade
Air Flow Direction Label Side
The Best Mounting Direction In Any Orientation
Operating Temperature -10 to +70 Deg.C
Storage Temperature -40 to +70 Deg.C
Bering System Precise Ball Bearing System 
Tolerances 15% on Rated Power & Current
Insulation Resistance More than 500M ohm between internal stator and lead wire(+) measured by DC 500V
Dielectric Strength
(withstand voltage)
Applied AC 500V for one minute or AC 600V for two seconds between housing and lead wire(+)
Safety Protection Electronic locked rotor protected
Vibration Vibration of acceleration 1.5G and frequency 5~50~5Hz is applied in the 3 directions (X, Y, Z) for 30 minutes, each direction at the cycle of 1 minute.
Addtronics Model Dimension

SUNON Model

P/N

Voltage
VDC

Bearing
Style

Current
AMP

Input
Watts

Speed
RPM

AirFlow
CFM

Pressure
Inch-H2O

Noise
dBA

Weight (g)
FAN6BS 60x60x25mm KD1206PTB1 MS

12

Ball 0.09 2.5 5100 23.5 0.21 34 55
FAN8BS

FAN8BS3P

80x80x25mm KD1208PTB2 (2).H 12

Ball

0.18 2.1 2900 39.0 0.17 32 92.5
FAN9BS

FAN9BS3P

92x92x25mm KD1209PTB2 (2).H 12

Ball

0.20 2.4 2600 48.5 0.16 33 108
FAN12BS 120x120x25mm KD1212PTB1-6A

12

Ball

0.40 4.8 3100 90 0.28 44.5 200
 
     
 
Home Company Product Spec Review Contact FAQ Order
 
  © 2005 Copyright. Addtronics. All Rights Reserved.